Three-Phase Packaged Systems 3 – 15 Ton

Three-Phase Packaged Systems 3 – 15 Ton

Mammoth Light Commercial packaged systems are strong and dependable. Our high-quality light commercial products come in a range of sizes and efficiencies, and are designed to meet your needs. Our three-phase packaged products are encased in galvanized steel for superior durability and come in a variety of heat pump, gas/electric, and electric configurations. Explore this page for more information about the different models.

Electric/Electric

P8SE, 14 SEER Packaged Air Conditioner, 3 – 5 Ton

The P8SE is a self-contained, high-efficiency packaged air conditioning system. It features a convertible design and contains corrosion-resistant components. This makes for one durable, versatile unit!

  • Convertible Air Delivery. This system is incredibly versatile. It can be either horizontal or downflow to accommodate rooftop or horizontal applications.
  • TXV. The externally equalized thermal expansion valve provides precise refrigerant control under varying load conditions.
  • Galvanized Steel Cabinet. Each P8SE is encased in a galvanized steel outer shell that is coated in a polyester-urethane finish for corrosion resistance.
  • R-410A Refrigerant. This unit uses the eco-friendly refrigerant choice – R-410A. This refrigerant has replaced R-22 as the new industry standard refrigerant.

P6SP, 11.2 EER Packaged Air Conditioner, 6 – 10 Ton

Looking for a packaged air conditioner designed primarily for retrofit applications? Check this model out. It is compatible with most standard footprints for maximum flexibility.

  • Freeze Protection Thermostats. The freeze protection thermostat provides reliable compressor operation. The compressor is, arguably, the most important part of the unit.
  • Crankcase Heater. To prevent liquid floodback and future compressor failures, this model contains a crankcase heater.
  • Copper Tube/Aluminum Fin Coils. The indoor and outdoor coils are designed to optimize heat transfer, minimize size and cost and increase the durability of the system.
  • R-410A Refrigerant. Comes compatible with R-410A refrigerant. This is the new industry standard and the most eco-friendly refrigerant choice.

P7TQ, 12.9 IEER Packaged Air Conditioner, 6, 7.5 and 10 Ton

The P7TQ is a next-generation, packaged air conditioner that fits popular existing curbs, eliminating the cost of an adaptor curb.

  • Compatible Connections. Matchbox design to fit on Carrier existing curbs and existing bottom gas and electrical connections if required.
  • Easy Installation. Low MCA/MOP so no need to upgrade electrical service in most applications. Unit weight is likely equal to or lower than other products, so no need for structural changes.
  • 1″ Foam Panel Wall Construction. No exposed fiberglass insulation in air stream for increased air quality and suppressed mold growth; lower ambient sound.
  • Heavy-Duty Hinged, Foamed Doors. Easy access to blower, controls and filters with no air leaks and no screws to lose.
  • Micro-Channel Coils. All aluminum for high corrosion resistance and increased heat transfer; 1/2 the refrigerant as compared to conventional units.
  • High Efficiency. Uses less grid power. 12.9 IEER, ASHRAE Std. 90.1-2013, California Title 24 Compliant.

Gas/Electric:

R7TQ, 12.7 IEER Gas/Electric Packaged System, 6-10 Ton

The R7TQ is a next-generation, direct replacement rooftop unit that fits popular Carrier pre-existing curbs, eliminating the cost of an adaptor curb.

  • Compatible Connections. Gas and electrical connections align with many existing units installed .
  • 1″ Foam Panel Wall Construction. No exposed fiberglass insulation in air stream for increased air quality and suppressed mold growth; superior noise reduction.
  • Heavy-Duty Hinged, Foamed Doors. Easy access to compressor, blower, controls and filters with no leaks and no screws to lose.
  • Micro-Channel Coils. All aluminum for high corrosion resistance and increased heat transfer; 1/2 the refrigerant as compared to conventional units.
  • Durable Finish. Pre-coated paint with a polyester urethane finish; 950-hour, salt-spray finish is 1.5 millimeters thick and resists corrosion 50% better than competitive units.
  • High Efficiency. 12.7 IEER meets ASHRAE Std. 90.1 – 2013 requirements.

R6GP, 11.2 EER Gas/Electric Packaged System, 6 – 10 Ton

Looking for a replacement for an old light commercial system? Check out this gas/electric unit. This unit is easy to install and retrofit, making it ideal for the replacement market.

  • For Easy Service. The high/low service ports on this unit allow for quick access without disturbing operation.
  • High/Low Pressure Switches. The high and low pressure switches ensure long compressor life. They feature a manual reset high-pressure control.
  • Permanently Lubricated Condenser Fan Motors. The heavy-duty PSC motor offers long-lasting reliability and quit operation. It requires no maintenance and is protected from rain and snow.
  • Crankcase Heater. The crankcase heater in this system protects from liquid floodback and future compressor failures.

R6GN, 10.8 EER Gas/Electric Packaged System, 12.5 & 15 Ton

Looking for a gas/electric packaged system, in a higher tonnage, specifically designed for retrofit applications? This model is compatible with most standard footprints, making installation simpler.

  • Two Stage Heating and Cooling. Two-stage heating and cooling power offers exceptional comfort and a greater range of both heating and cooling.
  • Baserails. The unit’s baserails provide lifting points that make installing this heating and cooling system simpler.
  • Convertible Air Delivery. Convertible air delivery makes the unit versatile. It can easily convert to horizontal airflow with a horizontal roof curb.
  • R-410A Refrigerant. This gas/electric system uses R-410A refrigerant. This type of refrigerant is the new industry standard and provides non-ozone-depleting performance.

R8GE, 14 SEER Packaged Air Conditioners, 2-5 Ton

The R8GE is a self-contained, high-efficiency packaged gas heat and electric air conditioning system. It provides the right packaged solution for your commercial space cooling and heating needs.

  • Easily Accessible Connections. Quick access to electrical, gas connects and external accessible refrigerant fittings.
  • Easy Installation. Factory charged and run tested for reliable startup. Easy supply fan CFM adjust to meet building requirements.
  • Convertible Air Delivery. Horizontal or downflow to accommodate rooftop or slab applications.
  • Proven, Industry-Standard Components. Easier availability reduces unit downtime during routine service and maintenance times.
  • Galvanized Steel Cabinet. Polyurethane finish provides 950 hour salt spray protection for corrosion resistance.
  • Environment Friendly. Low NOx emission on 3-5 ton units reduces pollution. Highly engineered piping design reduces system leaks.

Heat Pump:

Q6SP, 11.0 EER Packaged Heat Pump, 7.5 & 10 Ton

Looking for the ideal packaged heat pump for retrofit applications? Check out this model. It’s durable and fits most standard footprints.

  • Quality Compressor. Inside this packaged heat pump model we include a high-quality, state-of-the-art Copeland scroll compressor.
  • Convertible Air Delivery with Kit. This unit easily converts to horizontal airflow with a side panel including a duct flange and bottom close-off panels.
  • Copper Tube/Aluminum Fin Coils. High-quality indoor and outdoor coils are designed to optimize heat transfer, minimize size and cost, and increase durability.
  • R-410A Refrigerant. We make our units compatible with the most eco-friendly refrigerant choice – R-410A.